I lists 20 plumbing tools, explains each tool in plain task terms, then answers 6 common questions on power equipment, clog removal, pipe cutting, toolkit grouping, common tools, and special equipment. Code and standards references link tool choice to safe joins and verified threads.
What Are The 20 Tools List Homeowners Or Plumbers Use Most?
Pipe Wrench
Plunger
Plumbing Snake Drain Auger
Pipe Cutter
Teflon Tape
Channel Lock Pliers
Plumbing Level
Thermal Imaging Camera
Caulking Gun
Inspection Camera
Adjustable Wrench
Basin Wrench
Hacksaw
Deburring Tool Reamer
PEX Crimp Tool
Propane Torch
Tubing Bender
Tape Measure
Wet Dry Vacuum
Cordless Drill Driver
What Does Each Plumbing Tool Do?
1. Pipe Wrench
Pipe wrench is a jawed wrench that grips round pipe and turns threaded joints.
Use pipe wrench for steel nipples, unions, and seized fittings on NPT threads defined in ASME B1.20.1.
2. Plunger
Plunger is a pressure cup that moves water back and forth through a trap.
Use plunger for sink, tub, and toilet stoppages with standing water in the bowl or basin.
3. Plumbing Snake Drain Auger
Drain auger is a flexible cable that breaks soft blockages inside a drain line.
Use drain auger for hair clogs, paper jams, and buildup beyond the trap bend.
4. Pipe Cutter
Pipe cutter is a rotary cutting tool that scores pipe for a square end.
Use pipe cutter for copper tube and thin wall metal where a clean edge improves joint fit.
5. Teflon Tape
Teflon tape is a thread seal wrap placed on male pipe threads.
Use Teflon tape on threaded connections to reduce seepage and ease later disassembly.
6. Channel Lock Pliers
Channel lock pliers are adjustable groove joint pliers for nuts and slip joints.
Use channel lock pliers for trap nuts, supply nuts, and fixture locknuts in tight cabinets.
7. Plumbing Level
Plumbing level is a measuring level that checks plumb and drain slope.
Use plumbing level to set fall on drain lines and to align stub outs for fixtures.
8. Thermal Imaging Camera
Thermal imaging camera is a diagnostic camera that shows surface temperature patterns.
Use thermal imaging camera to trace hot water runs and spot cold wet zones behind finishes.
9. Caulking Gun
Caulking gun is a sealant applicator that lays a controlled bead at joints.
Use caulking gun at tub edges, sink rims, and trim seams to limit water entry.
10. Inspection Camera
Inspection camera is a pipe viewing device that records interior condition.
Use inspection camera to confirm roots, scale, offsets, or cracks before repair choices.
11. Adjustable Wrench
Adjustable wrench is a jaw wrench that fits multiple hex sizes.
Use adjustable wrench for angle stops, compression nuts, and small valve bodies.
12. Basin Wrench
Basin wrench is a long reach wrench made for faucet mounting nuts.
Use basin wrench under sink decks where hands and standard wrenches do not reach.
13. Hacksaw
Hacksaw is a hand saw that cuts metal using replaceable blades.
Use hacksaw for bolts, brackets, thin copper in a pinch, and small metal pipe sections.
14. Deburring Tool Reamer
Deburring tool is a finishing tool that removes burrs after a cut.
Use deburring tool to protect seals, improve solvent weld fit, and reduce edge turbulence.
15. PEX Crimp Tool
PEX crimp tool is a joining tool that compresses a ring over PEX and a barbed fitting.
Use PEX crimp tool with fitting systems covered by ASTM International ASTM F1807, then verify with a go no go gauge.
16. Propane Torch
Propane torch is a heating tool for soldered copper joints.
17. Tubing Bender
Tubing bender is a forming tool that bends soft tube without kinks.
Use tubing bender for neat copper supply lines and fewer elbow fittings.
18. Tape Measure
Tape measure is a layout tool for cut length and rough in spacing.
Use tape measure to set centerlines, trap arms, and fixture spacing before fastening.
19. Wet Dry Vacuum
Wet dry vacuum is a cleanup tool that lifts water and debris from floors and pits.
Use wet dry vacuum after backups or leaks to reduce water exposure during repair work.
20. Cordless Drill Driver
Cordless drill driver is a power tool that drills holes and drives screws.
Use cordless drill driver for straps, clamps, access panels, and hanger fasteners.
What Are The Plumbing Power Tools ?
Plumbing power tools are motor driven tools for cutting, drilling, threading, pressing, and drain clearing.
Use sets such as drill driver, reciprocating saw, oscillating multi tool, angle grinder, threader, and press tool for faster work on repeat tasks.
Thread form control ties to ASME B1.20.1 for common NPT style threads.
What Are The Best Plumbing Tools For Clogs?
Best clog tools are plunger, hand auger, toilet auger, cable machine, camera, and jetter.
Use plunger for trap zone blockages, use augers for fixture branches, use camera for repeat stoppages, use jetter for grease scale in long runs.
Household leaks waste nearly 10,000 gallons per year on average per United States Environmental Protection Agency WaterSense, so fast stoppage control limits overflow loss.
Which Plumbing Tool Is Used For Pip Cuitting ?
Pipe cutting tool choices depend on pipe material and diameter.
Use tubing cutter for copper, use ratchet cutter for plastic tube, use hacksaw or reciprocating saw for metal where rotation clearance is blocked.
Use deburring tool after any cut to protect seals and improve joint seating.
What Tools Under In Plumbing Toolkit?
A plumbing toolkit groups tools by task class: grip, cut, join, measure, clear, inspect, recover.
Use grip tools for turning joints, use cutting tools for square ends, use joining tools for seals and fittings, use inspection tools for diagnosis.
Join control on PEX ties to ASTM International ASTM F1807 scope for insert fittings and crimp rings.
What Are The Common Plumbing Tools?
Common plumbing tools are pipe wrench, channel lock pliers, adjustable wrench, plunger, drain auger, pipe cutter, thread seal tape, and level.
Use this set for fixture swaps, trap service, basic drain clearing, and leak sealing on threaded joints.
Traditional practice keeps a manual plunger and a hand auger as first response tools before machines.
What Are The Special Equipments?
Special equipment includes inspection camera, thermal imaging camera, pipe locator with sonde, hydro jetter, press tool, threading machine, test pump.
Use these tools for diagnosis, line tracing, heavy cleaning, rapid joining, and verified pressure tests.
Comments (0)
Comments are disabled.